Ultra Hold is the leading standard for soft bonds on the market for over 15 years and is our most popular Maximum Wear adhesive. An acrylic adhesive with consistent 4+ week hold times. Ultra Hold changed the industry by creating an acrylic adhesive that is better than the previously dominant silicone based adhesives. It dries clear and removes easily and has a quick cleanup for a liquid adhesive. Plus it dries clear, and stays strong! Ultra-Hold is a rock solid choice for a long term hold.

Available Sizes

No Brush .5 oz, Brush-on .5 oz, Brush-on 1.4 oz, Brush-on 3.4 oz, Pint (16 oz)

Directions

Before bonding, prepare skin and base with 99% Alcohol to remove residues. Then, apply a thing layer of adhesive to the skin and base, and blow dry until very tacky. Next, press the hair system onto the skin and hold firmly for 10 seconds. Do not swim, workout, or shampoo for at least 24 hours.

Ingredients

Acrylic Adhesive, Isopropanol, Ethyl Acetate, Heptane, Toluene

Cautions

Close cap tightly. Do not breathe fumes. Store below 90 degrees. Test on small area before use.

This product will extend the life of any tape or glue we sell. It’s the ultimate skin prep product. Normally a client would have to wait 24 hours after service to shower or workout, but not with Max Hold Sport. Your client can get active right after their install and get a longer hold time than they ever have! You will have longer hold times, and happier clients with this one simple product.

Directions: Apply one to two coats of Max Hold Sport to the scalp before you apply any adhesive. Let dry, then apply you adhesive on top. No need to wait 24 hours to get the adhesive wet. Enjoy all activities right after application. Apply and go for an instant, secure hold.

Ingredients Isopropyl Alcohol, Methacrylate Film Former, Dimethylphthalate

Caution:
Do not put near flame. External use only. Test on a small area before use. Keep away from children. Do not store above 120 degrees. Tighten cap promptly after use.

Sensi-Bond is a slightly less aggressive Hard Bond Adhesive. It’s great for those wanting a hard bond adhesive with slightly less hold time. Hard Bonds are basically like super glue for your hair system. They are designed to bond to hair stubble, not skin. They dry much more rigid than soft bond adhesives, but still have enough flexibility to give you long hold times. They are waterproof which makes them great for anyone who is very active, has oily skin, or lives in a humid climate.

Hold: 2-4 Weeks

Available Sizes: 1.1 oz (20-25 uses)

Directions:
Do not attempt to work with hard bond adhesives unless you are a professional. For best results, protect the hair system using P.A.T. Tape. If you choose this option, apply the tape around the perimeter of the hair system where it will attach to the hard bond. The slip side of the tape is made to fuse to the hard bond adhesive. Shave the hair around the top of the head along where the perimeter of the hair will sit. You want to be sure there is about 1/8″ of hair stubble to attach the unit to. Apply small amounts of adhesive to the hair stubble. Press the wig firmly in place. It may be helpful to work on small sections at a time because the glue dries so quickly.

Great White is our best and longest holding water based adhesive. It’s a copolymer adhesive that is strong, and dries clear, which will give your customers the confidence they need. It’s very easy to work with and not stringy, so you can save time in the salon. It is non-flammable so it saves you on shipping costs. Plus, the formula is bacteria resistant allowing the adhesive to stay fresher for longer. Think of it as a great alternative to Ultra Hold.

Hold: Maximum wear (3-5+ weeks) adhesives are the longest lasting adhesives we make. Depending on temperature, humidity, and body oils, they can last up to six weeks. Because they’re usually the most tacky, they require more skill to apply.

Available Sizes: Twist Top 1.4 oz, Brush-on 3.4 oz, Twist Top 8 oz, Pint 16 oz

Directions:
Make sure client’s scalp is clean and oil free. Poly systems: Using a makeup sponge, apply thin even coats of Great White to unit. Mesh Units: Using a makeup sponge, apply thin even coats of Great White to scalp. Blow dry until tacky between coats. Next, press the hair system onto the skin and firmly hold for 10 seconds. Do not swim, workout, or shampoo for at least 24 hours.

Ingredients:
Purified Water, Hydrophilic Acid Copolymer Resins (Latex Free)

Mity-Tite is our #1 daily wear liquid adhesive. This product is intended for touchups between replacements. If you intend to remove your hair system every day or every few days we recommend looking at our tapes for easier application and removal. However, if you are going for extended or permanent holds with other adhesives, then Mity-Tite is your new best friend. All adhesives break down at different rates based on environment and the person wearing it. Mity-Tite is there for when your unit starts to lift and you need to quickly and easily get a hold back. Many users carry it with them all the time just in case they need that emergency boost.

Hold: Daily Wear (1-7 days) adhesives are popular for their day-to-day use. Great for the customer who removes their unit daily, or every few days.

Available Sizes: Brush-on .5 oz, Brush-on 1.4 oz, Dab-on 1.4 oz, Brush-on 3.4 oz, Pint (16 oz)

Directions:
Before bonding, prepare skin and base with 99% Alcohol to remove residues. Then apply a thin layer of adhesive to the skin and base, and blow dry until very tacky. Next, press the hair system onto the skin and hold firmly for 10 seconds. Do not swim, workout, or shampoo for at least 24 hours.

Ingredients:
Acrylic Adhesive, Isopropanol, Ethyl Acetate, Heptane, Toluene

Cautions:
Close cap tightly. Do not breath fumes. Store below 90 degrees. Test on small area before use.